|
. 1A-WRC-Cx . |
|
|
Rugged Cables for WRC I/O racks |
 |
|
. A
Member of the (What
is |
|
|
. 1A-WRC-Cx . |
|
|
Rugged Cables for WRC I/O racks |
|
|
. A
Member of the (What
is |
|
.
Product Description: WRC-1781-A24A I/O racks are a good choice for machine controls, but they typically come with cheap & flimsy ribbon cables. When we couldn't find an off-the-shelf product for our own use, we built the 1A-WRC-Cx series - as a durable, high quality alternative to ribbon cables.
Not only are these cables more rugged and flexible, but the shielding allows you to run longer lengths with better noise immunity. Unlike ribbon cables, standard cable ties are no problem. These cables bend easily around corners, and fit nicely thru the back of a PC or raceway notches.
.
Problems with standard
sloppy ribbon cables. . .
. . . are solved. These 1A-WRC-Cx cables give
your work some professional finishing.
.
When placing an order, please use the following chart to derive the correct part number. Write down the Base Part Number, but omit the lower case 'x' wherever it appears. Then select the Desired Option that you want, and fill in the corresponding Part Number Code.
|
Base Part Number
|
||
|
Specification |
Desired Option |
Part Number Code |
|
Cable Length |
4' (1,219mm) |
4 |
|
8' (2,438mm) |
8 |
|
|
For any other custom length. |
Cxx (specify length in feet.) |
|
|
Shield grounding wire |
none |
0 |
|
18 gauge (min) ground wire |
G |
|
Example: Order part number 1A-WRC-C4-0, for a 4' (1,219mm) cable length with no shield grounding wire.
.
|
OTHER SPECIFICATIONS |
|
| Conductors | (50) 28AWG |
| EMI / ESD Shielding | Aluminum/polyester film foil enclosed in round tinned copper braid. |
| I/O Controller Card Connector |
This 1A-WRC-Cx cable has an Opto22 compatible, 50 position, .100"x.100" pattern, IDC SOCKET type connector, with polarity bump. Used for connection to I/O controller card 50 position, PIN type connector. |
| WRC Card Edge Connector | Mates to Opto22 compatible WRC-1781-A24A card edge connector. |
.
Terms, Conditions, and Warranty
A 90 day direct replacement warranty applies for any manufacturing defect, starting from Ampion ship date. An orientation key for the WRC edge connector is not included and the end user should take care to properly install the cable, but if damage occurs due to incorrect installation, the warranty shall be void.
.
|
Copyright 2002, Ampion Corp, all rights reserved.
OpenCNC is a trademark of Manufacturing Data Systems Inc.
OMAP, Open Modular Add-In Products, SonicEvents, PalletQ, and other products listed are trademarks of Ampion Corp, and so are all associated graphics.
